– Loosen the hose clamp -arrow- and remove the charge air
hose -1- with the air guide pipe downward.
– Remove the bolt -arrow- on the left and right.
– Unclip and remove the lower section -1- of the air duct.
– Remove the throttle valve control module. Refer to
⇒ 4.5 Throttle Valve Control Module GX3 , Removing and
Installing , page 309
– Lift the clamp -1-, remove the upper coolant supports and set
them aside.
– Disconnect the connectors -2, 3 and 4-. Remove the bolts
-1- and move the bracket to the side.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
.
Golf 2015 ➤ , Golf Variant 2015 ➤
2. Coolant Pump/Thermostat
233