Volkswagen Golf 2015 Repair Manual page 25

– Disconnect the connector -1- on the A/C Compressor Regu‐
lator Valve - N280- .
– Remove the bolts -arrows-.
– Remove the A/C compressor from the bracket with the refrig‐
erant hoses attached and tie up to the right side. While doing
so, do not bend, twist or stretch the refrigerant lines and hoses.
– Remove the left and right drive axles from the flange shafts.
Refer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 40 ; Drive
Axle; Drive Axle, Removing and Installing .
– Tie up the drive axles to the rear.
Note
Be careful not to damage the protective coating on the drive axle.
– Loosen the clamping sleeve -arrow- and push it toward the
rear.
– Remove the catalytic converter with the front exhaust pipe.
– Remove bolt -arrow-, push the bracket for the wiring harness
aside.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
Golf 2015 ➤ , Golf Variant 2015 ➤
1. Engine, Removing and Installing
17