1.6
Clamping Sleeve Installation Position
Installation Position for Rear Clamping Sleeve
– Install the clamping sleeve in the shown position.
•
Threaded connections point left
•
The threaded connection -arrows- must not project over the
lower edge of the lock washer.
Tightening Specification of Clamping Sleeve
Clamping Sleeve
Clamping sleeve -A- with two indi‐
vidual clamps
Clamping sleeve -B- with continu‐
ous clamp.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
Tightening Specification
25 Nm
30 Nm
Golf 2015 ➤ , Golf Variant 2015 ➤
1. Exhaust Pipes/Mufflers
347