Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
– Remove the camshaft and cover the open engine compo‐
nents.
Camshafts, Installing
Note
Sealing surfaces must be completely free of oil and grease.
♦
Pay attention that all roller rocker levers rest on the valve stem
♦
ends.
– If the crankshaft was turned in the meanwhile: bring the piston
for cylinder 1 to Top Dead Center (TDC) and then turn the
crankshaft back just a little.
– Remove any sealant residue from the groove on the cylinder
head cover as well as on the sealing surfaces.
– Clean the sealing surfaces. They must be free of oil and
grease.
– Lubricate the running surfaces of both camshafts.
– Place the intake camshaft -A- in the cylinder head. Turn the
cam lobes from cylinder 4 -arrows- upward.
– Check if the valve lifters for the cam adjustment actuators are
retracted.
– Place the exhaust camshaft in the cylinder head cover as il‐
lustrated. The cam pair -A and B- must be pushed together.
– Turn the exhaust camshaft until the markings -A and B- align.
154
Rep. Gr.15 - Cylinder Head, Valvetrain