– Clean the bearing cap and journal.
– Place the Plastigage
®
journal or into the bearing shells.
– Position the connecting rod bearing cap and tighten the old
bolts -item 1-
⇒ Item 1 (page 77)
– Install the connecting rod bearing cap.
– Compare width of Plastigage
Radial clearance:
•
New: 0.02 to 0.06 mm.
•
Wear limit: 0.09 mm.
– Replace connecting rod bolts.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
over the entire width of the bearing
without turning the crankshaft.
®
with calibrated scale.
Golf 2015 ➤ , Golf Variant 2015 ➤
5. Piston and Connecting Rod
85