Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
Mandatory Replacement Parts
♦ Seal - Catalytic Converter
Removing
Note
During installation, all cable ties must be installed at the same
location.
– Remove the connector -2- from the bracket and disconnect it.
Free up the wires.
– Remove the bolt -2- and the screw-type clamp.
Note
The installed position is shown in the illustration with the en‐
♦
gine removed.
Ignore item -4-.
♦
– Remove the nuts -1 and 3-.
– Remove the front tunnel brace -1-.
350
Rep. Gr.26 - Exhaust System, Emission Controls