Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
– Attach the bearing mount. Do not tilt it when doing this. Hand-
tighten the bolts -arrows-.
– Remove the Tensioner Locking Tool - T40267- .
– Tighten the bearing bracket bolts -arrows-. Tightening speci‐
fication -item 5-
⇒ Item 5 (page 115)
– Install the chain tensioner -2-. The wire clip must come in to
contact with the oil pan upper section opening -arrow-. Tighten
the bolt -1- and remove the Locking Pin (3 pc.) - T40011- .
146
Rep. Gr.15 - Cylinder Head, Valvetrain
.