Volkswagen Golf 2015 Repair Manual page 316

Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
– Disconnect the connector -1- from the Intake Manifold Runner
Position Sensor - G336- .
– Remove the nuts -A- from the intake manifold and remove the
bolts -arrows- using the Torx Socket - T30 - T10347- .
– Pull the intake manifold slightly away from the cylinder head
and remove the bolts -arrows- for the bracket -A-.
– Remove the intake manifold from the cylinder head.
Note
Cover the intake channels with a clean cloth.
Installing
– If the connections on the high pressure pump were loosened,
replace the connections.
– Position the intake manifold on the cylinder head and tighten
the connector bracket -A-.
308
Rep. Gr.24 - Multiport Fuel Injection