Volkswagen Golf 2015 Repair Manual page 99

1 - Alignment Pin
2 - Cylinder Head Gasket
❑ Replace after removing
❑ Installed position: the
part number faces the
cylinder head
3 - Cylinder Head
❑ Removing and instal‐
ling. Refer to
⇒ 1.3 Cylinder Head,
Removing and Instal‐
ling , page 94 .
❑ Check for distortion. Re‐
fer to
⇒ Fig. Checking Cylin‐
der Head for Distor‐
tion , page 93
4 - Bolt
❑ 4 Nm + 90°
❑ Follow the procedure
when loosening. Refer
to
⇒ Fig. Loosening Cyl‐
inder Head ,
page 92
❑ Follow the procedure
when tightening. Refer
to
⇒ Fig. Cylinder Head
Tightening Sequence ,
page 92
❑ Replace after removing
5 - Heat Shield
6 - Bolt
❑ 9 Nm
7 - Bolt
❑ 9 Nm
8 - Heat Shield
9 - Bolt
❑ 9 Nm
10 - Bolt
❑ 9 Nm
11 - Connection
❑ For coolant hose
12 - O-Ring
❑ Coat with coolant
❑ Replace after removing
13 - Cylinder Head Bolt
❑ Follow the procedure when loosening. Refer to
❑ Follow the procedure when tightening. Refer to
⇒ Fig. Cylinder Head Tightening Sequence , page 92
❑ Replace after removing
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
⇒ Fig. Loosening Cylinder Head , page 92
Golf 2015 ➤ , Golf Variant 2015 ➤
91
1. Cylinder Head