Volkswagen Golf 2015 Repair Manual page 347

3 - Bolt
❑ 20 Nm
4 - Bracket
5 - Retaining Loop
❑ Replace if damaged
6 - Rear Muffler
❑ Original equipment as one unit with rear muffler. For repairs, replace each separately
❑ Removing and installing. Refer to
❑ Separating point. Refer to
❑ Exhaust System, Installing without Tension. Refer to
⇒ 1.4 Exhaust System, Installing without Tension , page 345
7 - Rear Clamping Sleeve
❑ Before tightening, align exhaust system free of tension. Refer to
⇒ 1.4 Exhaust System, Installing without Tension , page 345
❑ Installed position. Refer to
❑ Tighten threaded connections evenly.
❑ Tightening specification. Refer to
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
⇒ 1.3 Muffler, Removing and Installing , page 343
⇒ 1.2 Exhaust Pipes/Mufflers, Separating , page 342
⇒ Fig. Installation Position for Rear Clamping Sleeve , page 347
⇒ Fig. Tightening Specification of Clamping Sleeve , page 347
Golf 2015 ➤ , Golf Variant 2015 ➤
.
.
.
1. Exhaust Pipes/Mufflers
.
.
339