Auxiliary Components Bracket, Removing And Installing - Volkswagen Golf 2015 Repair Manual

Assemble in reverse order of disassembly.
Tightening Specifications
♦ Refer to
⇒ 1.1 Overview - Cylinder Block, Belt Pulley Side , page 44
1.5 Auxiliary Components Bracket, Remov‐
ing and Installing
Special tools and workshop equipment required
♦ Shop Crane - Drip Tray - VAS6208-
Caution
This procedure contains mandatory replaceable parts. Refer
to component overview prior to starting procedure.
Mandatory Replacement Parts
♦ Bolts - Auxiliary Components Bracket
♦ O-ring - Engine Oil Cooler
♦
Removing
– Drain the coolant. Refer to
⇒ 1.3 Coolant, Draining and Filling , page 217
– Remove the generator. Refer to ⇒ Electrical Equipment; Rep.
Gr. 27 ; Generator; Generator, Removing and Installing .
CAUTION
Danger of frostbite from refrigerant.
– Do not open the A/C system refrigerant circuit.
– Disconnect the connector -1- on the A/C Compressor Regu‐
lator Valve - N280- .
– Remove the bolts -arrows-.
– Remove the A/C compressor from the bracket with the refrig‐
erant hoses attached and tie up to the right side. Do not bend,
twist or stretch the refrigerant lines and hoses.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
.
Golf 2015 ➤ , Golf Variant 2015 ➤
.
1. Cylinder Block, Belt Pulley Side
53