Volkswagen Golf 2015 Repair Manual page 176

Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
For Exhaust Side
– Install the Retainer - VAS5161/6- with Forks M6/M8 Threaded
- VAS5161/5- in the outer thread of the Valve Cotter Tool Kit
- Guide Plate 19B - VAS5161/19B- .
– Press down the Assembly Cartridge - VAS5161/8A- and at the
same time turn the knurled thumb screw on the Assembly
Cartridge - VAS5161/8A- to the right until the points engage
in the valve retainers.
– Move the knurled thumb screw back and forth slightly. This
presses the valve retainers apart and captures them in the in‐
stallation cartridge.
– Release the Pressure Fork With Lever For Assembly Car‐
tridge - VAS5161/2- .
– Remove the Assembly Cartridge - VAS5161/8A- .
– Remove the valve stem seals using Puller - Valve Seal -
3364- .
Install Valve Stem Seals
– Place the plastic sleeve -A- that is attached to valve stem seals
-B- on valve stem.
– Lightly oil the valve stem seal.
– Slide the valve stem seal onto the plastic sleeve.
– Carefully press the valve stem seal onto the valve guide with
the Seal Installer - Valve Stem - 3365- .
– Remove plastic sleeve.
– Insert the valve spring and valve spring plate.
– Install the Valve Keeper Tool Kit - VAS5161A- as illustrated.
168
Rep. Gr.15 - Cylinder Head, Valvetrain