Volkswagen Golf 2015 Repair Manual page 251

♦ Hose Clip Pliers - VAS6362-
Removing
– Remove the ignition coils with power output stages cylinder
3 . Refer to
⇒ 1.3 Ignition Coils with Power Output Stages, Removing and
Installing , page 357
– Release retainers in direction of -arrows- and remove wiring
duct -1- from bracket.
– Clamp off the coolant hoses -arrows- with the Hose Clamps -
Up To 25mm - 3094- .
– Loosen the clamps and remove the coolant hoses.
– Remove the bolt -1- and remove the upper coolant pipe.
Installing
Install in reverse order of removal. Note the following:
Note
Secure hose connections with standard production clamps. Refer
to the Parts Catalog.
– Check the coolant level. Refer to
Tightening Specifications
♦ Refer to ⇒ 3.1 Overview - Coolant Pipes , page 241
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
.
⇒ page 222
Golf 2015 ➤ , Golf Variant 2015 ➤
.
.
243
3. Coolant Pipes