Vibration Damper Sealing Ring, Replacing - Volkswagen Golf 2015 Repair Manual

Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
– Immediately attach the cover and tighten the bolts.
Note
Tighten the bolts -1 and 4- with an additional turn after installing
the vibration damper. The bolts must be removed again to install
the vibration damper.
– Tighten the bolts -1 through 8- in the sequence shown. Refer
to ⇒ 2.1 Overview - Timing Chain Cover , page 104
Continuation for Both Versions
– Install the vibration damper. Refer to
⇒ 1.4 Vibration Damper, Removing and Installing , page 47
– Install the Oil Pressure Regulation Valve - N428- . Refer to
⇒ 4.8 Oil Pressure Regulation Valve N428 , Removing and
Installing , page 206
– Install the ribbed belt tensioning damper. Refer to
⇒ 1.5 Auxiliary Components Bracket, Removing and Instal‐
ling , page 53 .
– Install the ribbed belt. Refer to
⇒ 1.2 Ribbed Belt, Removing and Installing , page 46
– Install the right front wheel housing liner. Refer to ⇒ Body
Exterior; Rep. Gr. 66 ; Wheel Housing Liner; Front Wheel
Housing Liner, Removing and Installing .
– Fill with engine oil and then check the level. Refer to ⇒ Main‐
tenance ; Booklet 36.1 ; Procedure Descriptions; Engine Oil,
Draining, Replacing Oil Filter, and Filling .
Tightening Specifications
♦ Refer to ⇒ 2.1 Overview - Timing Chain Cover , page 104
♦ Refer to
⇒ Fig. Engine Support - Tightening Specification and Se‐
quence , page 56
♦ Refer to ⇒ 2.1 Overview - Subframe Mount , page 29
2.3 Vibration Damper Sealing Ring, Replac‐
ing
Special tools and workshop equipment required
♦ Seal Installer - Crankshaft - T10354-
♦ Press Piece - Gearbox - T10375-
♦ Assembly Tool - Knurled Nut - T10531/4- from the Assembly
Tool - T10531-
♦ Seal Installer - Crankshaft - T40274-
Caution
This procedure contains mandatory replaceable parts. Refer
to component overview prior to starting procedure.
Mandatory Replacement Parts
♦ Bolt - Vibration Damper
♦ O-ring - Oil Dipstick Tube
112
Rep. Gr.15 - Cylinder Head, Valvetrain
.
.
.
.