– Turn the intake camshaft in the direction of the -arrow 1- using
the Adapter - T40266- . Slide the Camshaft Lock - T40271/2-
out of the chain sprocket splines -2- and bring the camshaft
into the rest position.
– Turn the exhaust camshaft in the direction of the -arrow 1- us‐
ing the Adapter - T40266- . Slide the Camshaft Lock -
T40271/1- -2- out of the chain sprocket splines and bring the
camshaft into the rest position.
– Remove the cylinder head cover bolts in -1 to 6- sequence.
– Remove the cylinder head cover.
– Remove the camshaft and cover the open engine compo‐
nents.
Camshafts, Installing
Note
Sealing surfaces must be completely free of oil and grease.
♦
♦
Pay attention that all roller rocker levers rest on the valve stem
ends.
– If the crankshaft was turned in the meanwhile: bring the piston
for cylinder 1 to TDC and then turn the crankshaft back just a
little.
– Remove any sealant residue from the groove on the cylinder
head cover as well as on the sealing surfaces.
– Clean the sealing surfaces. They must be free of oil and
grease.
– Lubricate the running surfaces of both camshafts.
– Place the intake camshaft -A- in the cylinder head. Turn the
cam lobes from cylinder 4 -arrows- upward.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
Golf 2015 ➤ , Golf Variant 2015 ➤
141
4. Valvetrain