Fuel Rail, Removing And Installing, Direct Fuel Injection; Throttle Valve Control Module Gx3 , Removing And Installing - Volkswagen Golf 2015 Repair Manual

– Tighten the nuts -A- hand-tight.
– Tighten the bolts -arrows- evenly, working from the inside to
the outside. Use the Torx Socket - T30 - T10347- .
– Install in reverse order of removal.
Tightening Specifications
♦ Refer to ⇒ 4.1 Overview - Intake Manifold , page 296
♦ Refer to
⇒ 4.2.2 Overview - Intake Manifold Lower Section with Fuel
Rail, Multiport Fuel Injection , page 302
4.4 Fuel Rail, Removing and Installing, Di‐
rect Fuel Injection
Note
Intake manifold must be removed, Intake manifold, removing.
Refer to
⇒ 4.3 Intake Manifold, Removing and Installing , page 304
– Remove all electrical connectors from the fuel injectors.
– Remove bolts -arrows- from the fuel rail.
– Remove fuel rail from the cylinder head.
Installing
– Install in reverse order of removal.
– Install the intake manifold. Refer to
⇒ 4.3 Intake Manifold, Removing and Installing , page 304
Tightening Specifications
♦ Refer to
⇒ 4.2.1 Overview - Intake Manifold Lower Section with Fuel
Rail, Direct Fuel Injection , page 300
♦ Refer to
⇒ 4.2.1 Overview - Intake Manifold Lower Section with Fuel
Rail, Direct Fuel Injection , page 300
4.5 Throttle Valve Control Module - GX3- ,
Removing and Installing
Caution
This procedure contains mandatory replaceable parts. Refer
to component overview prior to starting procedure.
Mandatory Replacement Parts
♦ Seal - Throttle Valve Control Module
The Throttle Valve Control Module - GX3- is comprised of:
♦ EPC Throttle Drive - G186-
♦ EPC Throttle Drive Angle Sensor 1 - G187-
♦ EPC Throttle Drive Angle Sensor 2 - G188-
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
.
.
.
.
Golf 2015 ➤ , Golf Variant 2015 ➤
.
4. Intake Manifold
309