– Slide the headlamp into the bumper cover guide.
– Uniformly adjust the headlamp gap distribution. Refer to
⇒ "1.4 Headlamp Installation Position, Correcting",
page 105
.
– Push on the bumper cover -1-. Pay attention that it is pushed
in the mounts -2- under the headlamp.
– Perform a function test.
– Check and correct headlamp adjustment, if necessary. Refer
to ⇒ Maintenance ; Booklet 36.1 ; Procedure Descriptions .
Tightening Specifications
♦ Refer to
⇒ "1.1 Overview - Headlamp", page 92
1.3
Headlamp, Adjusting
⇒ "1.3.1 Halogen Twin Headlamp, Adjusting", page 105
⇒ "1.3.2 HID Headlamp, Adjusting", page 105
⇒ "1.3.3 Fog Lamp, Adjusting", page 105
⇒ "1.3.4 Auxiliary Headlamps, Adjusting", page 105
1.3.1
Halogen Twin Headlamp, Adjusting
Adjusting the halogen twin headlamp. Refer to ⇒ Maintenance ;
Booklet 36.1 ; Procedure Descriptions .
1.3.2
HID Headlamp, Adjusting
HID headlamp, adjusting. Refer to ⇒ Maintenance ; Booklet 36.1 ;
Procedure Descriptions .
1.3.3
Fog Lamp, Adjusting
Adjusting the fog lamps. Refer to ⇒ Maintenance ; Booklet 36.1 ;
Procedure Descriptions .
1.3.4
Auxiliary Headlamps, Adjusting
Retrofitted auxiliary headlamps must be checked and adjusted
according to the guidelines used for other systems.
1.4
Headlamp Installation Position, Correcting
Procedure
– Loosen the bolts -3 through 6-.
Golf 2015 ➤ , Golf Variant 2015 ➤
Electrical Equipment - Edition 12.2015
105
1. Headlamp