Protection Against Electrostatic Discharge (Esd); Ensuring Adequate Free Space Around Analyzer For Immediate Disconnection Of Power Cable In Case Of Emergency - Agilent Technologies E5071C ENA Series Installation Manual

Installation
Environmental Requirements

Protection Against Electrostatic Discharge (ESD)

Set up a static-safe work-station to protect the electronic components from the damage by
the electrostatic discharge (ESD) as shown in Figure 2-2.
Figure 2-2 Example of the static-safe work station
Ensuring Adequate Free Space around Analyzer for Immediate
Disconnection of Power Cable in Case of Emergency
As described in "Disconnection from Supply Source" on page 25, the power supply is
disconnected by removing the power cable's connector plug from either the AC outlet or
the E5071C unit. When installing the E5071C, ensure that there is sufficient free space
around the unit to permit quick disconnection of the plug (from AC outlet or E5071C unit)
in case of emergency.
16 Chapter 2