Protection Against Electrostatic Discharge (Esd); Ensuring Adequate Free Space Around Analyzer For Immediate Disconnection Of Power Cable In Case Of Emergency - Agilent Technologies ENA Series Installation And Quick Start Manual

Installation
Environmental Requirements

Protection Against Electrostatic Discharge (ESD)

Set up a static-safe work-station to protect the electronic components from the damage by
the electrostatic discharge (ESD) as shown in Figure 2-3. Table 2-2 shows the accessories
available that provide ESD protection.
Table 2-2 The accessories available that provide ESD protection
Name
Static-control table mat and earth ground wire
Wrist-strap cord
Wrist-strap
Heel-straps
Figure 2-3 Example of the static-safe work-station
Ensuring Adequate Free Space around Analyzer for Immediate
Disconnection of Power Cable in Case of Emergency
As described in "Disconnection from Supply Source" on page 32, the power supply is
disconnected by removing the power cable's connector plug from either the AC outlet or
the E5061A/E5062A unit. When installing the E5061A/E5062A, ensure that there is
sufficient free space around the unit to permit quick disconnection of the plug (from AC
outlet or E5061A/E5062A unit) in case of emergency.
20
Agilent Part Number
9300-0797
9300-0980
9300-1383
9300-1169
Chapter 2