Protection Against Electrostatic Discharge (Esd); Ensuring Adequate Free Space Around Analyzer For Immediate Disconnection Of Power Cable In Case Of Emergency - Agilent Technologies E5070B ENA Series Installation And Quick Start Manual

Installation
Environmental Requirements

Protection Against Electrostatic Discharge (ESD)

Set up a static-safe work-station to protect the electronic components from the damage by
the electrostatic discharge (ESD) as shown in Figure 2-3. Table 2-2 shows the accessories
available that provide ESD protection.
Figure 2-3 Example of the static-safe work-station
Ensuring Adequate Free Space around Analyzer for Immediate
Disconnection of Power Cable in Case of Emergency
As described in "Disconnection from Supply Source" on page 35, the power supply is
disconnected by removing the power cable's connector plug from either the AC outlet or
the E5070B/E5071B unit. When installing the E5070B/E5071B, ensure that there is
sufficient free space around the unit to permit quick disconnection of the plug (from AC
outlet or E5070B/E5071B unit) in case of emergency.
22 Chapter 2