Honda FourTrax Foreman Rubicon 2005 Service Manual page 58

FRAME/BODY PANELS/EXHAUST SYSTEM
TRIM CLIP
Release by pul ling the center pin up using a snap , - - - - - - - - - - - - - - - - - ,
ring pliers or flat blade screwdriver and remove the
trim clip.
Vv'hen installmg the
Install the clip and lock it by pushing the center pin
tnm CliP, carefully
securely.
a/<gn
the
clip hole to
aVOId damagmg the
clip
SEAT
Remove and install
Lock
Release
CENTER PIN
Unlock the seat by turning the release lever upward. '- S - E - A - T --~ B~ O ~ S~ S~E~ S ------ P - R-O-N-G - S---,
Pull the seat back and remove it.
Install the seat by inserting the prongs into the seat
~
retainer on the frame.
~
Push the seat forward and align the mounting
bosses with the mounting rubbers, then press down
to lock
it.
RECOIL STARTER COVER
LEVER
/ -
RETAINERS
Remove the recoit starter cover by releasing the , - - - - - -- - - - - - - - - - - ,
three bosses from the grommets. BOSSES GROMMETS
8e careful not to
I~~~~
drs lodge the
Install the recoil starter cover in the reverse order of
I:
grommets in the
removal.
frame.
2-4
RECOil STARTER COVER