Advertisement
CRANKSHAFT/AUTOMATIC TRANSMISSION
AUTOMATIC TRANSMISSION UNIT
INSTALLATION
Before installing the automatic transmission unit,
, - - - - - - - - -
-- - - - - - - ,
check
the
following
components
for smooth
oper
a-
PUMP SWASH
PUMP/MOTOA SHAFT
tion.
PLATE ASSEMBLY
-
rotation of the pump swash plate assembly
-
rotation of
the
pump/motor shaft
-
movement of the motor swash plate assembly
and ball nut
Install the dowel pin into the rear
crankcase.
Install the automatic transmission unit and tighten
the five mounting
bolts.
Assemble the crankcase
halves
(page
13-16).
CRANKCASE BEARING REPLACEMENT
REAR CRANKCASE
Drive
the mainshaft bearing out of the
rear
crank-
case
Drive the balancer bearing out
of
the rear
crankcase.
MOTOR
SWASH
BALL
NUT
PLATE ASSEMBLY
13-13
Advertisement
