Advertisement
SUB·TRANSMISSION/GEARSHIFT LINKAGE
Install the output shaft into
the
crankcase and the
output
driven
gear onto the shaft with the large
raised side facing out.
Install the rear crankcase cover (page 12-6).
SUB·
TRANSMISSION
DISASSEMBLY
12·12
Remove
the
shift fork shaft and shift
forks
(page 12-
81.
Remove
the
washers
from
the countershaft and
reverse idle shaft.
Pull
out the mainshaft from the automatic transmis-
sion
unit.
Remove
the
count
ershaft assembly and reverse idle
gear as a set.
Remove
the reverse idle gear shaft and washer.
Remove the O-ring from the automatic transmission
unit.
Disassemble the
countershaft.
Clean all disassemble parts in solvent thoroughly.
REVERSE
IDLE
Advertisement
