Advertisement
REAR AXLE INSTALLATION
Apply molybdenum disulfide grease to the cen ter
splines of the axle.
Install the axle into the
final
drive gear case from
right
side
until
it is
fully
seated.
Coat a new
O-ring
with
grease
and install it into
the
groove in the gear case.
Install the side collar onto the rear axle with the
tapered side facing
inward.
Install
the
left axle housing with four new nuts, and
tighten
the nuts.
TORQUE:44 N 'm
(4.5
kgf·m
,
33 Ibf.ft)
Install
the left
rear
shock absorber into the axle
housing and tighten the lower mounting bolt.
TORQUE:
44 N·m (4.5
kgf·m,
33 Ibf·ft)
Install the skid plate and tighten the three bolts.
TOROUE :32 N 'm
(3.3
kgf.m,
24Ibf·ft)
REAR DRIVING MECHANISM
AEARAXlE
SIDE COILLA,R
NUTS
LEFT
18-23
Advertisement
