Advertisement
FRONT DRIVING MECHANISM
Install the
tie-rod
onto the knuckle.
Install a
new tie-rod
ball joint nut and tighten
it
by
holding the ball joint stud flats with an open end
wrench.
TORQUE:
54 N'm (5.5
kgf·m,
40
IbUt)
Install
a
new
cotter
pin.
Tighten the hub nut to the specified torque and fur-
ther
tighten
until its grooves align with
the
cotter
pin hole.
TORQUE:
78 N 'm (8.0 kgf·m
,
58
Ibf.ft)
Install a
new
cotter
pin.
Install the front wheel (page 14-14).
DIFFERENTIAL REMOVAL
17-14
Drain
the
differential oil (page 3-18),
Remove the
following:
-
front fender/inner fender (page 2-11)
-
left drive shah (page 17-7)
Remove the
two
bolts, guard plate and front vehicle
speed
sensor.
Remove the two bolts and clutch cover.
Advertisement
