Advertisement
CONTROL MOTOR
REMOVALfINSTALLA TION
Remove
the
inner fender
(page
2·9).
Disconnect the control motor 2P
(Natural
)
connec-
tor.
Remove the left engine side cover (page 10-5).
Remove the two mounting boils and control motor.
Coat a
new
O-r
ing wi
t
h
engine oil and install it into
the control motor groove.
Apply molybdenum oil solution to
the
motor shaft
splines and install the control motor into the front
crankcase cover by aligning the boll holes.
Install
the mounting
bolts
and lighten
them.
HONDAMATIC
24-43
Advertisement
