Honda FourTrax Foreman Rubicon 2005 Service Manual page 124

FUEL SYSTEM
Remove the bolts.
Remove the air cleaner housing from the frame.
InSlaUthe air cleaner housing and connecting hose,
and align the groove in the connecting hose with
the lug on the air cleaner housing.
Install the air intake duct, aligning guide on the duct
with the seat retainer.
Install the removed parts in the reverse order of
removal.
CARBURETOR REMOVAL
Remove the air cleaner housing (page 5-5),
Release the carburetor heater wire from the wire
clip and disconnect the heater 2P connector.
Remove the carburetor drain hose from the clamp.
Do nolloosen the
Disconnect the throttle position sensor 3P connec-
throttle POSItIOn
tor.
sensor attachmg
screws unless the
throttle posrll()(1
sensor rsqUires
rep/l1C6ment
5-6
Remove the throttle position sensor wi re from the
clamp.
Slide the rubber cap off the starting enrichment (SE)
valve nut.
Loosen the SE valve nut and remove the SE valve
from the carburetor.
Turn the fuel valve OFF and disconnect the fuel
hose from the carburetor.