Advertisement
Install the mounting rubbers on the upper hanger
bushing with the large
I.D.
side facing in.
Install the upper engine hanger bracket and bolts.
After installing all the
mounting
fasteners and seat
them,
tighten
the fasteners in order as
follows.
Tighten the left
and right lower engine hanger
nuts.
TORQUE
:
54
N 'm (5.5
kgf·m,
40
Ibf·ftJ
Tighten the left lower hanger bracket bolts.
TORQUE:
32
N·m
!3.3
kgf·m,
24
Ibf.ft)
Tighten
the engine side upper hanger bolts.
TORQUE:
32
N 'm
(3.3
kgf.m,
24
Ibf.ft)
Tighten the frame side upper hanger nut.
TORQUE:
54
N 'm (5.5
kgf·m,
40 Ibf.ft)
Install the
universal joint
boot
onto the engine.
Install the boot band and tighten
the
screw securely.
Install the
engine oil temperature (EOT) sensor with
a new sealing washer and tighten
it.
TORQUE:
18
N 'm
11 .8
kgf·m,
13
Ibf.ftJ
Connect the EOT sensor connector.
Coat new O-rings with oil and install them onto the
oil pipes.
Install the oil pipes into the oil
tank
and
t
ighten the
bolts securely.
ENGINE
REMOVAL/INSTALLATION
BOLTfNUT
!111!
"7111
O-RING
IIiiiiII'
iii
'I
,
OIL PIPES
7-9
Advertisement
