Advertisement
SERVICE INFORMATION
GENERAL
SUB-TRANSMISSION/GEARSHIFT LINKAGE
•
This section covers service of the gearshift lever linkage and sub-transmission. The shift lever linkage can be serviced
with the engine installed in the frame. To service sub-transmission, the engine must be removed from the
fr
ame .
•
cylinder
head
and sub-transmission lubricating oil is fed through the oil passage in the
rear
crankcase cover. Clean
the
oil
passage before installing the rear crankcase cover.
SPECIFICATIONS
TORQUE VALUES
Gearshift lever box cover bolt
Gearshift lever linkage arm pivot
boll
Gearshift lever linkage
tie-rod
lock nut
Gearshift drum center bolt
Gearshift drum stopper arm pivot bolt
5 N·m (0.5 kgf·m, 3.6 Ibf.ft)
27 N'm (2.8 kgf·m, 20 IbUt)
10 N·m (1.0 kgf·m, 7 IbUt)
27 N'm (2.B kgf.m, 20 Ibf·h)
12 N·m (1.2 kgf.m, 9Ibf·h)
Apply locking agent to the threads
Apply locking agent to the threads
Apply locking agent to
the
threads
12-3
Advertisement
