Advertisement
FRONT DRIVING MECHANISM
DIFFERENTIAL INSTALLATION
17-32
Place the differential into
the
frame.
Install
the right drive shaft onto the differential in
the same manner as on (page
17-12).
Install a new stopper ring into the
groove
in
the pro-
peller shaft.
Apply 5 - 8 9 of
molybdenum
disulfide grease
to the
propeller shaft joint and pinion joint splines.
Install the propeller shaft assembly inlo the
differen-
tial until
the
stopper ring seats in the pinion joint
groove.
Make sure that the stopper
ring
is seated properly
by pulling on the pinion joint lightly.
Install the propeller shaft boot over the pinion
joint
securely and the boot band into the boot groove.
Coat a new O-ring with molybdenum disulfide
grease and
install
it
into
the
groove
in the
output
shaft.
Apply molybdenum disulfide grease to
the
propeller
shaft joint splines.
Move the differential forward for maximum clear-
ance between the propeller shaft joint and output
shaft.
Install the propeller shaft
joint
over
the
output shaft.
Advertisement
