Advertisement
COOLING SYSTEM
Install the fan shroud/motor assembly onto the radi
-
ator and tighten the three
bolts.
'05 - '07 shown
:
SHROUD/MOTOA
Clamp the fan motor
wire.
RADIATOR INSTALLATION
Install
the
radiator/cooling
fan
assembly, aligning
. - - -
the lower mounting bosses with the
holes
in the
frame.
Install and
tighten
the two
mounting
bofts.
Connect the upper and lower
radiator hoses,
and
tighten the hose band screws.
Connect
the
fan motor breather hose.
_~~~"Il.
~ Iq;;"
ASSEMBLY
BREATHER
Route the fan motor wire and breather hose
prop-
L:;:;::::';:::':;~~~~;;~
arty (page
1-24).
Connect the fan molor 2P
connector.
Install the accessory socket 2P connector onto the
stay of the fan motor shroud.
Connect the siphon hose to the radiator.
Install the oil cooler (page
4-7).
Fill and bleed the cooling system (page 6-5).
THERMOSTAT
REMOVAL
6-10
Drain the coolant from the engine (page 6-5),
Remove the fuel tank cover (page 2-6).
loosen the band screw and remove the air intake
duct from the air cleaner housing
.
Advertisement
