Enabling the image freeze
Pause the display screen despite any change in the source device.
1. Select Menu > Image Settings > Image Freeze.
2. To pause the screen, check Image Freeze.
3. To unfreeze the screen, press any button on the keypad or remote control.
4. Select Yes.
Adjust the color of the image
Calibrate the accuracy of primary colors and the wall color, which can change because of lighting
and environmental factors. Lighting and other environmental factors may slightly change how these
colors appear on your screen. While the change is negligible in most cases, you may prefer to
recover the originally intended color performance before trying to match colors from several
projectors.
Adjusting primary colors
To achieve consistency use a color meter to measure the native primary colors-red, green, blue,
and white, as they appear on the screen. Use hue, saturation and gain (HSG) to adjust each color
component to essentially calibrate a projector to its surroundings, compensating for factors such as
screen type, lamp and/or ambient lighting, and improves color accuracy and consistency in a group
of projectors. It ensures a good starting point for further customizing and matching; however, is not
critical for all installations.
1. Select Menu > Image Settings > Color Matching > HSG Adjustment.
2. To enable HSG Enable, press ENTER.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
41