Tmd-Time And Date - Christie CineLife+ 4 Series Technical Reference

Return the TCGD file used by the specified channel:
(TCG+CHAN? "Media Block Flat")
Result:
(TCG+CHAN! "DC28 DCI XYZE 314 351")
Set the TCGD file for the specified channel to the specified file:
(TCG+CHAN "Media Block Flat" "Rec. 709")
Set the TCGD file for the specified channel to the specified file at index 1 from a previous listing:
(TCG+CHAN "Media Block Flat" 1)
TMD–Time and Date
Sets the time zone and Daylight Saving Time, and reads the time and date.
Parameters
• Access level: Service
• Power level (minimum): Power Down
Commands
Command Description
TMD+DATE? Returns the date in the format yyyy-mm-dd. (Read-
only)
TMD+DSTA? Returns the status of Daylight Saving Time. (Read-only) —
TMD+DSTA <0 | 1> Enables or disables the Daylight Saving Time.
TMD+TIME? Returns the time in the format hh:mm:ss. (Read-only)
TMD+TOFF Sets the SM time offset in seconds.
Examples
Return the date:
(TMD+DATE?)
Result:
(TMD+DATE! "2019-08-21")
Return the status of Daylight Saving Time:
(TMD+DSTA?)
Disable Daylight Saving Time:
(TMD+DSTA 0)
CineLife+ Technical Reference–Serial Commands
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
CineLife+ serial commands
Values
—
0 = Disables Daylight Saving
Time
1 = Enables Daylight Saving
Time
—
+/- 300 seconds
28