Table of Contents
Advertisement
Time/Date (TMD)
TMD
Preference
CONTROL GROUP:
Description
Set the date, time or time zone.
Subcode
DATE
TIME
Examples:
(TMD+TIME "17:50:45") Set new local time.
(TMD+DATE "2007/02/30") Set the local date.
(TMD+TIME?) Get local time (TMD+TIME! 17:50:45).
Test Pattern Enable (TPE)
TPE
Preference
CONTROL GROUP:
Description
Automatically select White test pattern based on the control being adjusted. Certain controls that deal with color
settings will enable a white test pattern when entering WebUI menus and disable when exiting the menu. This
control defines whether this happens. There are some situations where the user may not want to automatically
go to a white test pattern when the WebUI menu is selected, for example if they have specific content that they
wish to evaluate.
0 = Disable automatic test patterne
1 = Enable automatic test pattern
Subcode
<No Subcode>
Examples:
(TPE 0) Disable test pattern.
(TPE ?) Report state of test pattern enable.
Target White Point (TWP)
TWP
Preference
CONTROL GROUP:
Description
This command is used to set the ArrayLOC target white-point. Several preset white points are provided in
addition to four user setting white points. The control subcodes provide access to all the presets. Due to the
large number of sub-codes they are not all listed. Instead a simple substitution for the small 'x' is made,
according to the following table:
0
1
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Set the date in the form yyyy/mm/dd.
Set the local time in the form hh:mm:ss
NOTE: Time must be set using a 24-hour clock (regardless of
LOC+TIME setting).
Power Up
SUBCLASS:
Description of Use
Power Up
SUBCLASS:
3200K
5000K (D50)
Serial Command Reference
Admin
ACCESS LEVEL:
Operator
ACCESS LEVEL:
Operator
ACCESS LEVEL:
105
Advertisement
Table of Contents
