Tdt-3D Test Pattern; Tmd-Time And Date - Christie Crimson Technical Reference

Command Description
Enabled when the selected signal is a 3D
signal and 3D mode is enabled.
TDT–3D Test Pattern
Enables or disables a 3D test pattern.
Only applies to: Mirage HD25, Mirage WU25
Commands
Command Description
TDT <0 | 1> Enables or disables the 3D test pattern.
TMD–Time and Date
Sets the date and time in the real-time clock.
Commands
Command Description
TMD+DATE <date> Sets the date for the clock.
TMD+TIME <time> Sets the time for the clock.
Examples
Set the date to January 17th, 2018:
(TMD+DATE "2018/01/17")
Result:
(65535 00000 FYI00916 "Setting Date to 2018/01/17")
Get the local time:
(TMD+TIME?)
Result:
(TMD+TIME! "19:45:23")
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Values
3D sync delay and/or sync inversion
(Default)
1 = Configures the 3D Sync OUT port to be
fed to another downstream projector,
without including any 3D sync delay or
inversion
Values
0 = Disables the 3D test pattern
1 = Enables the 3D test pattern
Values
<date> = String in the following format:
YYYY/MM/DD
<time> = String in the following format:
hh:mm:ss
Serial API commands
50