Connection Cables For The Respective Connection; Got Connector Specifications - Mitsubishi Electric GOT2000 Series Connection Manual

1.4 Connection Cables for the Respective Connection

To connect the GOT to a device in the respective connection type, connection cables between the GOT and a device are
necessary.
For cables needed for each connection, refer to each chapter for connection.
1.4.1

GOT connector specifications

The following shows the connector specifications on the GOT side.
Refer to the following table when preparing connection cables by the user.

RS-232 interface
Use the following as the RS-232 interface and the RS-232 communication unit connector on the GOT. For the GOT
side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector specifications
GOT
GT27
GT25
GT23
GT15-RS2-9P
GT01-RS4-M
GT2104-RTBD,
GT2103-PMBDS2
*1 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the GT2104-RTBD,
GT2103-PMBDS2.
(2) Connector pin arrangement
GT27, GT25, GT23, GT15-RS2-9P, GT01-RS4-M

RS-422/485 interface
Use the following as the RS-422/485 interface and the RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
GT27
GT25
GT23
GT2104-PMBD
GT2103-PMBD
GT2104-RTBD
GT2104-PMBDS
GT2103-PMBDS
GT2103-PMBLS
GT15-RS4-9S
GT01-RS4-M
GT15-RS4-TE
*1 The terminal block (MC1.5/5-ST-3.5 or corresponding product) of the cable side is packed together with the GT2103-PMBD.
*2 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the
GT2104-RTBD, GT2103-PMBDS, GT2103-PMBLS.
1 - 20
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
Hardware
Connector type
version*1
9-pin D-sub (male)
―
inch screw fixed type
―
9-pin D-sub (male)
inch screw fixed type
―
―
9-pin terminal block
GOT main part connector
see from the front
1 5
6 9
9-pin D-sub (male)
Connector type
9-pin D-Sub (female)
M2.6 millimeter screw fixed type
*1
5-pin terminal block
*2
9-pin terminal block
9-pin D-Sub (female)
M2.6 millimeter screw fixed type
―
Connector model
17LE-23090-27(D4C )
17LE-23090-27(D3CC)
*1
MC1.5/9-G-3.5BK
GT2104-RTBD, GT2103-PMBDS2
See from the back of a
9-pin terminal block
Connector model
17LE-13090-27(D2AC)
MC1.5/5-G-3.5BK
MC1.5/9-G-3.5BK
17LE-13090-27(D3AC)
―
Manufacturer
DDK Ltd.
DDK Ltd.
PHOENIX CONTACT Inc
GOT main part
Manufacturer
DDK Ltd.
PHOENIX CONTACT Inc
PHOENIX CONTACT Inc
DDK Ltd.
SL-SMT3.5/10/90F BOX