ZXR10 2900 Series User Manual
84
Confidential and Proprietary Information of ZTE CORPORATION
PVLAN Configuration
PVLAN Overview
PVLAN
(Private VLAN) is a port-based VLAN. It consists of many
promiscuous ports and isolated ports. Isolated ports can not ac-
cess each other, but isolated ports and promiscuous ports can ac-
cess each other.
ZXR10 2920/2928/2952/2936-FI supports 4 PVLANs. Each PVLAN
supports a promiscuous port. There is no restriction for isolated
ports number, but they can not be gigabit ports.
PVLAN permits the user to access server, but the direct inter-ac-
cess between users is not permitted. Therefore, the configuration
only takes effect on a whole PVLAN area (the shared and isolated
ports exist together). The promiscuous and isolated ports are nec-
essary to be configured, otherwise, the configuration of PVLAN will
be invalid.
Basic Configuration of PVLAN
To configure PVLAN, perform the following steps.
Command
set pvlan session <1-4> add
zte(cfg)#
promiscuous {port<portid>|trunk<trunki
d>} isolate-port <portlist>
set pvlan session <1-4> delete
zte(cfg)#
isolate-port <portlist>
set pvlan session <1-4> modify
zte(cfg)#
promiscuous {port <portid>| trunk
<trunkid>}
set pvlan session <1-4>
zte(cfg)#
clear-config
show pvlan
zte(cfg)#
PVLAN Configuration Example
1. Example 1
Function
This adds the isolate
ports and promiscuous
ports into PVLAN
instance.
This deletes the isolate
ports from PVLAN
instance. When only
one isolated port exists,
this port can not be
deleted.
This modifies the uplink
port in PVLAN instance.
This clears PVLAN
session configuration.
This views PVLAN
configuration.