Table 90 Set Lacp Aggregator Delete Command; Table 91 Set Lacp Aggregator Mode Command; Table 92 Set Lacp Port Mode Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
88 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
Result: This adds a specified port to the aggregation group.
3. To delete a specified port to the aggregation group, use
command set lacp aggregator <trunkid> delete port
<portlist> in global configuration mode.
Table 90.
T 9 0 S L
A B L E E T A C P
Format
set lacp
aggregator
<trunkid>
delete port
<portlist>
Result: This deletes a specified port to the aggregation
group.
4. To set aggregation mode of the aggregation group, use
command set
{dynamic|static|mixed} in global configuration mode.
This is shown in Table 91.
T 9 1 S L
A B L E E T A C P
Format
set lacp aggregator
<trunkid> mode
{dynamic|static|mixed}
Result: This sets aggregation mode of the aggregation
group.
5. To set the mode used by the port to participate in the
aggregation, use command set lacp port <portlist> mode
{active|passive} in global configuration mode.
shown in Table 92.
T 9 2 S L
A B L E E T A C P
Format
set lacp port
<portlist> mode
{active|passive}
Result: This sets the mode used by the port to participate in
the aggregation.
6. To configure
participating in the aggregation,
port <portlist>
configuration mode.
A D C
G G R E G A T O R E L E T E
Mode Function
Global This deletes a specified port to the
config aggregation group
lacp aggregator
A M C
G G R E G A T O R O D E O M M A N D
Mode Function
This sets aggregation
Global
mode of the aggregation
config
group
P M C
O R T O D E O M M A N D
Mode Function
This sets the mode used by the
Global
port to participate in the
config
aggregation
the timeout information
use command set lacp
timeout {long|short}
This is shown in Table 93.
This is shown in
O M M A N D
<trunkid> mode
This is
of the port
in global