Cleaning The Cleaning Wiper - Xerox 8264E User Manual

• After head cleaning is complete, "Ready to Print" displays in the control panel.
Notes:
• If blurring or incomplete printing continues after one head cleaning, repeat the process,
using the Strong cleaning setting.
• If blurring or incomplete printing do not disappear after several head cleanings, refer to
Troubleshooting, and take appropriate measures.

Cleaning the Cleaning Wiper

This section describes when and how to clean the cleaning wiper.
1. Cleaning frequency
The cleaning wiper should be cleaned once or twice a week or when blurs or incomplete printing
appear on printed media after head cleaning.
2. Cleaning method
Follow the procedure below to clean the cleaning wiper.
Note:
• Use a new foam swab or lint free cloth to clean the cleaning wiper. Use Eco-cleaning
solution or Isopropyl Alcohol with the swab or cloth.
For details on the foam swab and the lint free cloth, refer to
1. With the printer turned ON, make sure of the following.
• Printing or other operations are not in progress.
• "Ready to Print" displays in the control panel.
2. Display the CR Maintenance menu in the control panel.
a. Press the [Menu] key. "Menu 1: Setup>" displays in the control panel.
6-22 Xerox 8254E / 8264E Color Wide Format Printer
User Guide
Options/Supply List.