IQ-12 Tapes Not Peeled
Phaser 7500 Printer Service Manual
The highlight portions are too obvious. The whole paper seems to be filled with
stripes.
Cause
•
The SLA surface protective tape is not peeled off.
Initial Actions
•
Check the paper transfer path.
•
Ensure there are no debris on the transfer path.
Troubleshooting Reference
Applicable Parts
Troubleshooting Procedure
Step
Actions and Questions
1
Inspect the LED Print Head and
check whether any protective tape
remains on the SLA.
Is there tape remaining on the
SLA?
Note:
Do not forget to check for and peel off any tape when replacing the LED Print
Head (spare part).
Print-Quality Troubleshooting
Example Print
Yes
Remove the
tape.
Tapes Not Peeled
No
Troubleshooting
complete.
5-39