Printing On Card Stock Or Custom Size Paper - Xerox Phaser 6100 User Manual

3
When you print, configure the tray selection to MPT, the
paper type to Letterhead, and the paper size in the
software application. For details, see page 3.7.
Printing on Card Stock or Custom Size
Paper
• Print index cards (3.5 in. x 5.5 in.), postcards, and custom
size paper with the Phaser 6100 printer. The minimum size is
90mm by 140mm (3.5in. by 5.5in.) and the maximum size is
216mm by 356mm (8.5in. by 14in.).
• Always insert the short edge into the Multi-purpose Tray first.
If you want to print in landscape mode, make this selection
using your software. Do not insert paper with the long edge
entering the printer first as it may cause the paper to jam.
• Do not load more than 10 cards into the Multi-purpose Tray at
a time.
• Do not print on paper smaller than 90mm (3.5in.) wide or
140mm (5.5in.) long.
• Set margins at least 4.3mm away from the edges of the
paper in the software application.
U P S
SING APER OR PECIALTY
2
2.21