Using Trays 1, 2 And 3 (If Installed); Using Trays 4 And 5 In The 2,500 Sheet Feeder - Xerox DP N24 System Administrator Manual

Using Trays 4 and 5
in the
2,500 Sheet Feeder
Pull out the tray until it stops.
1
3 Place paper in the tray, against the left side
(refer to Figure 2.3 on page 2-10 for
orientation). Slide back the stop.
Do not stack paper above the indicated
mark.
Trays 4 and 5 in the optional 2,500 Sheet Feeder hold up to 1,000
2
sheets of 20 lb (80 g/m ) paper each (in A4, Letter and Executive
size only). The following procedure uses Tray 4 as an example, but
can be used for Tray 5 as well.
Prepare a stack of paper, making sure the tops
2
of the sheets are aligned.
4 Push the tray back in.
Loading Paper
Chapter 2: Paper Handling 2-9