Initial Setup; Setting The User Interface Language And Other System Options - Olympus 45MG User Manual

4. Initial Setup

The following sections describe basic system configurations.
4.1

Setting the User Interface Language and Other System Options

The 45MG can be configured to display the user interface in the following languages:
English, German, French, Spanish, Japanese, Chinese, Russian, Swedish, Italian,
Norwegian, Portuguese, or Czech. You can also set the character delimiting the radix
of a number.
The 45MG includes a beep tone generator that confirms when a key is pressed and
notifies you of an alarm condition. The beeper can be set to On or Off.
To save battery power while the instrument is not in use, enable the inactive time
function so that the instrument automatically turns off when no key has been pressed
and no measurement has been made within a period of about six minutes.
To change the user interface language and other system options
1. In the measurement screen, press [SETUP], and then select SYSTEM.
2. In the SYSTEM screen (see Figure 4-1 on page 44):
a) Set BEEPER to ON or OFF.
b) Set INACTIVE TIME to ON or OFF.
c) Set LANGUAGE to the desired language.
d) Set RADIX TYPE to the desired character (PERIOD or COMMA) in order to
separate the integer and the decimal digits.
DMTA-10022-01EN, Rev. C, January 2015
Initial Setup 43