Precautions For Proper Use Of The Power Cord - Olympus USPM-RU-W Series Operation Manual

Precautions for proper use of the power cord

When no power cord is attached to the product, refer to the "Specification" and
"Certification cord" below to choose a proper power cord for the unit.
Rated Voltage
Rated Current
Rated Temperature
Length
Components
The power cord must be certified by any one of the certification organizations in Table 1, or
be associated with any one of the certification marks shown in Table 1 and/or 2. The
connector must be associated with any one of the certification marks in Table 1. If no cords
certified by any of the certification organizations in Table 1 are available in the country
where you use the product, use a substitute certified by the certification body of the country
or any similar organization.
Certification
Country
organization
Argentina SAA
Australia SAA
Austria ÖVE
Belgium CEBEC
Canada CSA
Denmark DEMKO
Finland FEI
France UTE
Germany VDE
Ireland NSAI
PV8344F4E013
We do not guarantee the electrical safety of the product, if an
incorrect power cord is connected to the product.
Specification
125 V AC (100–120 V AC ), 250 V AC (220–240 V AC)
6A minimum
60ºC minimum
3.05 m maximum
Grounded inlet plug, with the opposite end formed in compliance with IEC
Table 1. Certification cord
Certification
mark
49
Certification
Country
organization
Italy IMQ
Japan JET,JQA,TUV,
UL-APEX/MITI
Netherlands KEMA
Norway NEMKO
Spain AEE
Sweden SEMKO
Switzerland SEV
UK ASTA,BSI
USA UL
Certification
mark