Top Panel; Figure 1-4 Top Panel Of The Omniscan Mx2 - Olympus OmniScan MX User Manual

DMTA-20015-01EN [U8778402], Rev. M, February 2017
1.4

Top Panel

There are three connectors located on the top panel of the OmniScan MX2 (see
Figure 1-4 on page 32).
Scanner
interface
Scanner interface
Used to connect a scanner device equipped with an encoder.
Alarm and I/O
Used as an alarm output and control input.
SVGA output
An external VGA or SVGA monitor that mirrors the OmniScan MX2 display may
be connected to this DB-15 port.
32 Chapter 1
Alarm and I/O
connector

Figure 1-4 Top panel of the OmniScan MX2

SVGA output