Figure 10-12 File Measurement Summary - Olympus EPOCH 650 User Manual

Viewing a Summary of all Saved Data
After you have completed saving data to a file, you may want to view a summary of
the different measurements saved in the different IDs within the file. (The
measurement parameters displayed are selected from Meas Setup > Reading Setup
[group 3/5].)
To view a summary of all saved data in a file
1. Choose File > Open (group 5/5), and select the file you want to view.
2. Press Summary (P3 key) to view a measurement summary for all the saved IDs in
the selected file (see Figure 10-12 on page 203).
3. Press Done (P1 key) to return to the previous screen.
To record and export thickness data
1. Make a thickness measurement and check that the expected reading is displayed
in the Reading 5 box.
2. Press Thick Record (P3 key).
A .csv file is written to the microSD card.

Figure 10-12 File measurement summary

DMTA-10055-01EN, Rev. A, February 2015
Data Logger 203