Deleting A File Or Its Contents; Figure 6-30 Displaying The Grid Edit Screen - Olympus 45MG User Manual

6.7.4.5

Deleting a File or Its Contents

The file delete function can be used to completely erase the file from the datalogger
memory, or to erase the contents of a file. Files that are delete-protected cannot be
deleted until the delete protection is disabled (see "Editing a File" on page 108.)
Once a file is deleted, it is not possible to recover any information previously
contained in that file.
To delete a file stored in the 45MG
1. In the measurement screen, press [FILE], and then select DELETE.
2. In the DELETE screen (see Figure 6-31 on page 112):
a) Set DELETE ON to FILE in order to delete an entire file.
b) In the list, select one or more files that you want to delete.
A check mark appears on the right of the line of files selected.
c) Press [2nd F], [] to leave the list.
d) Select the desired Delete Stored Data or Entire File option.
e) Set DELETE MODE to DATA if you only want to delete the contents of the
file.

Figure 6-30 Displaying the grid edit screen

CAUTION
DMTA-10022-01EN, Rev. C, January 2015
Software Options 111