Concluding Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Figure 161: Installing the expansion card
Ê Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot.
Ê Fasten the expansion card with the screw (see circle).
Ê If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
cables" on page
Ê If applicable, connect an FBU cable to the expansion card as described in
section "Connecting the FBU to the RAID controller" on page
8.4.1.4

Concluding steps

"Reassembling" on page 73
Ê
Ê If applicable, connect all external cables to the expansion card(s).
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
RX2540 M2
"Installing SFP+ transceiver modules" on page
559.
Upgrade and Maintenance Manual
Expansion cards and backup units
249.
"List of used
318.
257