Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 299

8.6.2.7 Concluding steps
"Reassembling" on page 73
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
8.6.3 Installing a GPGPU card in riser module 2
Upgrade and Repair Unit
(URU)
Tools: side cutter
Phillips PH2 / (+) No. 2 screw driver / nut driver 5 mm
8.6.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 95
Ê
"Disabling SVOM boot watchdog functionality" on page 96
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
8.6.3.2 Removing the slot cover from the riser card holder
Ê Remove the slot cover from the riser card holder as described in section
"Removing the slot cover from the riser card holder" on page
8.6.3.3 Installing a riser card
Ê Install the riser card as described in section
PCIe slot Gen3 x16" on page
RX2540 M2
285.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
Software: 5 minutes
"Installing a riser card with one
284.
299