Concluding Steps; Replacing The 4X 2.5-Inch Pcie Ssd Backplane; Preliminary Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
7.5.3.5

Concluding steps

"Installing the fan box" on page 399
Ê
"Reassembling" on page 73
Ê
"Installing 2.5-inch HDD/SSD modules" on page 193
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
7.5.4

Replacing the 4x 2.5-inch PCIe SSD backplane

Field Replaceable Unit
(FRU)
Tools: flat screw driver
7.5.4.1

Preliminary steps

"Locating the defective server" on page 61
Ê
"Suspending BitLocker functionality" on page 95
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
Ê Remove all SSD modules from the server front as described in section
"Removing 2.5-inch HDD/SSD modules" on page
V
CAUTION!
Ensure that all HDDs are uniquely identified so that you can reinsert
them into their original bays after replacing the HDD backplane.
"Getting access to the component" on page 68
Ê
"Removing the fan box" on page 397
Ê
214 Upgrade and Maintenance Manual
Hardware: 10 minutes
197.
RX2540 M2